|
Upswung
Lifting Gate openers
We manufacture a complete line for use with our hydraulic single
and dual
automatic swing gates and works well with any Aluminum fence gate. We
also offer a complete line of Garage Door opener, automatic gate
openers,
swing electric gate openers, inground gate operators, hydraulic
gate
openers, and slide gate openers for commercial and residential use.
|
Choose Driveway-Light Gate
Opener Lifting Hinge for gates to 150lbs in steel and Aluminum
Fence Gates |
Choose Driveway-Heavy Gate
Opener Lifting Hinge for gates over 150lbs. |
|
Driveway-Light |
Driveway-Heavy |
Upswung™ LLC Lifting Gate Hinges with Hydraulic Automatic Gate
Opener and Snowgate Hinges with Electric Gate Openers for uphill and
snow country driveways. US Patent # 6,611,992 other patents pending.
Traditional
Gate Operation- Our Swinging
gates lift and swing open at the same time, which is pleasing and
inviting to guests, as opposed to Barrier gate openers that lift over
your head and guests have to pass underneath.
No Opener Arm- All UpSwung™ Hinges with Electric Gate
Openers require no unsightly opener attachment points or special
reinforcement to gate body to pull it open, and work great with Aluminum
Fence Gates.
Uphill Grades- Our
Hi-Lift Driveway Hinge accommodate driveways with uphill grades UP TO
30% and more.
Snow-Gate Opener Hinges-
Will radically lift your steel or aluminum fence gate to
clear deep snow by lifting at a grade of 50% to clear heavy
snowfalls powered by a quality Automatic Gate Operator.
Use your own Gate- Unlike
automatic Barrier Gate Openers which require you use their stock
aluminum folding gate, our Lifting Hinge Gate Openers use any steel or
Aluminum Fence gate you or your Architect may design.
Everything included- Hydraulic Gate Opener & Gate Opener
Control Box are included in an assembled integrated unit
which simply bolts to the ground or welds on to your column for
fast installation. There is nothing left to buy.
Safety- All our
Lifting Gate Hinges are counterbalanced for safety by two springs, and
controlled by a hydraulic gate opener for safety redundancy.
Long Life & Low
Maintenance- The Automatic Gate
Opener with its fewer moving parts and the patented torsion spring
counterbalancing of the gate make light work for the powerful Hydraulic
Automatic Gate Operator.
Ease of Installation- Every
Lifting Gate Opener Hinge is fully assembled, tested, pre-wired,
adjusted, ready to install with the minimum of site labor.
Easy Retrofitting- Installs
behind your existing gate column without modification to your column, or
can be welded to existing steel brackets behind the column.
Both Gate Hardware model
lines of Gate Opener Lifting Hinges lift from 15% to 50% grades,
and uses our HL410-220 or SEA half-tank automatic gate openers which are
included. These Lifting Hinge Gates can also be used in right/left pairs
for Dual Gate Operator systems. All gate hardware is included.
Saves
Money-You use only one of our gate systems to clear steep
uphill grades better than two regular non-lifting dual gate openers
split at the center and held high off the ground to clear an uphill grade.
Gate Opener Design Problems Solved with Lifting Gate
Hinges
|
