barrier gate opener
  manual barrier gate opener
Sales of Electric Gate openers for Commercial, Residential and automatic gates application. 
Phone Hours (PST)
7:30 to 4:00 Mon.-Fri.

       

Residential Gate Operators |Commercial Gate Operators | Swing Gate Openers
Slide Gate Operators
| Gate Opener Accessories | Access Control Systems

Home 
sea hydraulic gate opener
Swing  Operators
Slide Operators
Barrier Operators
barrier gate operator
Upswung Manual
Barrier Gates
 
Elite Openers
Residential Openers

Commercial Openers
Liftmaster Chamberlain
Swing  Operators

Slide Operators
Barrier Operators
sentex systems
Replacement Parts for HL410-11 to 440
faac hydraulic gate opener
FAAC Swing Openers

FAAC Slide Operators
Milleredge Safety
MillerEdge

emx access control
Driveway Probes

LINEAR ACCESS CONTROL AP-4 SINGLE DOOR GATE CONTROLLER WITH RADIO RECEIVER 
ACCESS CONTROLThe AP-4 is a single door gate controller with a built-in radio receiver that supports up to 339 transmitters that have a single entrance or gate, the AP-4 is the ideal wireless-based access control system. It can be used to remotely activate devices such as gate operators, door strikes, or door operators. Based on the proven AP-1, AP-2 and AP-3 access controllers, the AP-4 is small enough to be mounted within the gate operator. The AP-4 has a built-in radio receiver. It has a 250 foot range that can be extended even farther with an optional EXA-2000 antenna. Two relay outputs are provided: one for gate or door access; the other for obstacle control using the MGT, the industry’s only supervised safety edge transmitter. The AP-4 looks for an hourly status transmission from the MGT to report on transmitter functionality, battery condition, and case integrity. If any of those conditions require attention, the AP-4 will alert the user by beeping once every five seconds. The user must then activate the transmitter twice in order for the AP-4 to grant access. Installation and set-up are simple. The AP-4 operates on 12-24 volts, ac or dc. It can be powered directly from the radio power output of most gate operators. Learning, suspending, or deleting transmitters is as simple as pressing few keys on the AP-4’s built-in keypad. Program data is stored in non-volatile EEPROM; data retention is in excess of ten years, even in the event of a power failure. The AP-4 is compatible with all MegaCode format transmitters, which come factory programmed with one of over 1,000,000 possible codes, all but eliminating any chance of duplication

Features:

  • Ideal for gated communities, parking facilities, and industrial sites.
  • Easy to set-up and use — up to 480 remotes can be programmed with a few keystrokes.
  • Easy to add, suspend, and delete transmitters through programming mode — no transmitter dip switches to set.
  • Supports 480 block coded transmitters or 238 individual transmitters/wireless keypad entry codes.
  • Supports one fully supervised reversing edge transmitter.
Linear Access List Price  Internet Price
AP-4  ACP00894 $154.00 $95.00
 
      TELEPHONE:  775-588-1475     FAX: 775-588-1473 
         BUSINESS HOURS:   7:30am to 4pm PST

  Residential Gate Operators |Commercial Gate Operators | Swing Gate Openers
Slide Gate Operators
| Gate Opener Accessories | Access Control Systems 


electric gate opener

Terms /Conditions & Return Policy
  Copyright © 2009
Electric Gate Openers